1. The joint is made by five times of inserting, and the five times of inserting can be composed of three times of inserting the whole strand and two times of reducing the Strand. All splices shall be laid in the opposite direction to the wire rope, except for the first group of insertion, the tail end of other groups inserted into all strands shall be laid in the opposite direction to the wire rope. 2, the insertion should be carried out by one strand up and one strand down 3, if the wire rope has fiber main core, the core should be inserted with the first group of the first tail end through, and then the exposed core cut. If the strand has a fiber core, the strand core should be left in the original strand. If the steel wire rope has an independent metal wire core, the core should be divided into three parts, namely: one or two strands, one or two strands, one or two strands plus its core. Use three interleaved ends to insert the three sections and only go through the three complete junctions. 4. If the wire rope has an independent wire strand core, the core should be folded inward during the first insertion, and then fully inserted upward into the center of the five complete insertion plug. 5. All inserts shall be tightly pulled until they are in line with the center line of the inserted wire rope. In order to smooth and round the insertion points, the proper tools should be used to reshape them into proper positions.