The commonly used steel wire rope rope clamp is divided into: U-type, riding type, holding type three. Among them, the horse type rope clip connection force is the strongest, the application is also the most widespread. Generally, the type and quantity of the rope clamp should be reasonably selected according to the diameter of the wire rope. Use Caution: 1. When choosing rope clamp, the inner net distance of u-ring should be 1 ~ 3mm larger than the diameter of wire rope. 2. Fastening bolts must be tightened, generally to the wire rope is compressed to the diameter of the standard; 3. The U-shaped part should be in contact with the wire rope head, and can not be reversed with the main rope. 4. In order to check whether the rope clamp joint is safe and reliable or to find out whether the wire rope joint part is sliding in time, a rope clamp is usually added about 500mm behind the last rope clamp, if the wire rope joint slips, the phenomenon of“Safe bend” can be visualized, then the treatment measures should be taken in time.